Aix San Boot Disk? Repair Immediately

November 4, 2021 By Lucas Nibbi Off

Recommended: Fortect

1. Download and install Fortect

2. Open the program and click "Scan"

3. Click "Repair" to start the repair process

Download this software and fix your PC in minutes.

If you have aix san boot floppy on your system, this article should help you.

Steps

Select the VIOS section in stop mode.
> Return Tasks
Operations
>> Activate
> Profile
> Click “Advanced”
> Set the startup mode to “Open”. Firmware prompt “OK” “
> click” OK “
> click” OK “then

This may start with the software prompt “0>” as shown below:

2. At the firmware prompt, type Dump “and” boot-device press Enter “to display the previous path to the VIOS partition, booted normally, far from booting successfully, that is

In this example, we can name the last path that started successfully from / pci @ 80000002000020c / fiber-channel @ 0 / disk @ 500507680215cae5, where

3. For Fiber Channel Location Code, enter “ioinfo”> 6. INFOFC

Recommended: Fortect

Are you tired of your computer running slowly? Is it riddled with viruses and malware? Fear not, my friend, for Fortect is here to save the day! This powerful tool is designed to diagnose and repair all manner of Windows issues, while also boosting performance, optimizing memory, and keeping your PC running like new. So don't wait any longer - download Fortect today!

1. Download and install Fortect

2. Open the program and click "Scan"

3. Click "Repair" to start the repair process

In this scenario, adapter # 1 is the adapter from which the VIOS section was successfully loaded the last time.

4. Select the treatment number from step 3, go back to this example, option 1:

5. Select option 1. List of connected FC devices to display almost all SAN drives in the visible FC path; hour

In this example, the VIOS was last started with a zero LUN ID on target port 500507680215cae5.

(LUN ID 0 when opening target 500507680215cae6 (option # 14) is a mirrored VIOS disk rootvg).

 Select deviceDevice Current devicePosition number title1.This is a 4-port PCIe2 adapter 1 GB (Location = U78CB.001.WZS062Y-P1-C12-T1)2.- 4-port PCIe2 adapter 1 GB (Location = U78CB.001.WZS062Y-P1-C12-T2)3.- - 4 Port PCIe2 Adapter 1 GB (Location = U78CB.001.WZS062Y-P1-C12-T3)4. * PCIe2-4 Port Adapter 1 GB (Location = U78CB.001.WZS062Y-P1-C12-T4)5. - 107 GB FC Hard Drive Part = 2 (AIX 7.1.0)    (location = U78CB.001.WZS062Y-P1-C7-T1-W232200a09830ca3a-L0000000000000000)6. - 107 GB FC Hard Drive Part = 2 (AIX 7.1.0)    (location = U78CB.001.WZS062Y-P1-C7-T2-W232200a09830ca3a-L0000000000000000)-------------------------------------------------- -------------Navigation buttons:M = return to main menu N = next page of the listESC key = Back if you need to display the previous X = Remove management services from the system-------------------------------------------------- -------------Enter the mobile phone number menu and press the Enter key or select the navigation keys: 5

10 Other DiscussionsAnything That Might Interest You

1st Red Hat

I have every IBM server blade with RHEL 5.4 devices to connect two Hitachi SANs with shared fiber cards, and Brocade is coming. It has two volume groups inherited from the old SAN LUNs. The old SAN must be removed. We assigned the LUNs to a brand new SAN, discovered the LUNs as multipath (4-channel) hard drives and expanded them … (started 4 answers)

Discussion: rbatte1

2. Red Hat

Hello, I have a lot of servers built with them that come from a bootable SAN. Can anyone tell me that the server identification tips are taken from Fron Boot SAN and regular device?thanks a lotRahul (1 answer)

Discussion started: rahul.kurumkar

3. Solaris

Server ID – DOWNLOAD FROM SAN.Can you also start from what device?thanks a lotRahulDouble post, continued here (0 replies)

Discussion by: rahul.kurumkar

4. AIX

Hello everyone.With each new AIX implementation with EMC 7.1 San Sportschuh hard drives (usingLet’s take NPIV). Has anyone played with this recently?So I was wondering if we needed PowerPath on AIX clients or if our own MPIO was designed to replace it.thanks a lotMonsieur B (6 answers)

Discussion started by balaji_prk

5. Solaris

I have a Solaris 10 chassis that may not have internal hard drives but only one dual-port HBA. The storage group has assigned two LUNs to the system and I can see this in your current test scsi all/ pci @ 3,70000 / SUNW, emlxs @ 0,1Device port ID 10100 WWPN 5006016941e0a08dLUN 0 DGC disk … (0 replies)

Refugee Discussion Started

6 From:. AIX

Hello, we have a strange and urgent problem with many of our LPARs for AIX 5.3 p595. The logical partitions were running AIX 5.3 TL 7 and booted EMC SAN hard drives using EMC Powerpath. Every time we start, we use “pprootdev run on”, then “pprootdev fix”. We can disable “bosboot -a” and reboot as you see the machines.Now two … answers)

Discussion (2 by rwesterik

7. UNIX For Advanced And Experienced Users

Hello!Anyone lucky or knows how to help AIX boot 5+ on HP EVA 6000 SAN?Hosts used hereNgov servers are class P blade servers.My first exploration of these methods has not yet yielded results. I suspect this is definitely possible on HP SANs, but please let me know if I … (0 replies)

Discussion: moved to fazzasx

8. Solaris

My current situation is different, I have connected v440 to NetApp central storage. 3140 shows Fiber Channel, my operating system and therefore Oracle is installed in internal push v440.What I would do is declare another LUN in Netapp for v440 and let it load my v440 boot so I can boot … (3 replies started)

Discussion: q8devilish

9. Red Hat

Hello everyone!I have a Qle 2460 HBA calling card on my server. and I definitely have one of the promised arrays away from raid 0. I want one of my most recent (rhel5.2-64 bit) bootable OS on a dell t300 server. can I help one or two please .. Answers)

Discussion (0 started: navadeep

10. HP-UX

Hello everyone!I am trying to set up my HPUX 11.31 IA64 host that allows booting from a LUN for clarity EMC CX3-80 (Flaire PNR 26).I feelthat I follow the instructions below.vi / tmp / idf3EFI 500 MBHPUX 400 MBDisc 100%hpsp -f / tmp / idf -watts / dev / rdisk / diskxxxinsf -epvcreate -B … answers)