FIX: Cisco IP Checksum Error
February 15, 2022
Recommended: Fortect
This article can help if you are experiencing Cisco IP checksum errors on your system. The remote machine stopped responding to fax manipulation from the local machine, causing the connection to be lost.
definitions. The remote computer did not answer the fax, keep control of the local computer as the connection drops frequently. These errors can occur when the phone lines that use the area to send faxes are usually old or (static on the phone line).
Useful definitions and instructions for retrieving messages that may appear when sending a fax.
Make sure you have added a fax driver for your site and that it is not stopped. Try lowering your machine’s fax pulse setting. If a communication error occurs, change the fax speed setting to Slow (9600 bps) on the control panel.
Error codes that may appear when receiving a fax.
200 Fax completed successfully. You definitely don’t need to act.
Your Brother machine’s display mayA “Communication Error” message will appear if the manufacturer has detected a communication error while sending or receiving a fax. This type of error is usually caused by interference on the telephone line, a serious bad telephone line connection, or a fancy alarm system or other device connected to the line. one.
221 The sender pressed the stop button before the fax was completed successfully. Request a fax blame.
222: Several reasons:
A. According to the HP support site, error codes 388 are generated when there is too much noise on the line to establish a valid network connection between two fax machines. HP suggests the following possible solution: “Try receiving the fax again after the phone line condition improves.
The fax answered an incoming speakerphone call. Make sure the incoming selection is a fax Fitness device and no voice call.
This command was built into Cisco IOS Release 12.2(33)SXH. Use this command to verify that the socket you are using opens normally. If there is a strong local and remote endpoint, the Internet connection will be established using the described ports. Here is an example output from the show ip sockets command:
Stop was mostly pressed before or by the sender because the call is usually answered. When sending But the fax ends the call, just like you. the machine starts to receive, reduce the number of rings according to your needs.settings. Or ask to resend the fax.
Recommended: Fortect
Are you tired of your computer running slowly? Is it riddled with viruses and malware? Fear not, my friend, for Fortect is here to save the day! This powerful tool is designed to diagnose and repair all manner of Windows issues, while also boosting performance, optimizing memory, and keeping your PC running like new. So don't wait any longer - download Fortect today!
