How To Fix Blue Screen On Gigabyte Motherboards
November 28, 2021Recommended: Fortect
This guide will help you when you notice blue screen on Gigabyte motherboards.
Today I added a fan to my computer and when I started to turn it back on, I actually booted the BIOS, there was a blue touchscreen in the BIOS that only said “GIGABYTE – UEFI DualBIOS” (as shown in the photo).
First, remove the newly provisioned hardware devices and restart them. However, see if that takes it off.Also make sure the assigned RAM, etc. are properly inserted into the ports.If this is a new computer, please install the latest BIOS and updates for the SCSI controller.Also check if the hard drive is healthy.
It should definitely display this screen for about 5 seconds to get more information and then shut down as it still appears to be in a continuous loop.
Recommended: Fortect
Are you tired of your computer running slowly? Is it riddled with viruses and malware? Fear not, my friend, for Fortect is here to save the day! This powerful tool is designed to diagnose and repair all manner of Windows issues, while also boosting performance, optimizing memory, and keeping your PC running like new. So don't wait any longer - download Fortect today!
I amI tried my best to remove and reinsert the exact same CMOS battery, and tried to carry RAM sticks with me, leaving only one inside.
I have also tried moving the SATA cables around the motherboard.
One week (today) my Windows (1903) Ten started up with a blue screen right after a new login (SYSTEM_SERVICE_EXCEPTION gdrv2.sys). Removing the Gigabyte Center app including RGB Fusion in Safe Mode fixed the issue. Am I the only one going through this?
Bug-String | Bug-Check-Code | Option 1 | Option 2 | Parameter 3 | Parameter 4 | Called by driver | Called by address | Alarm address |
---|---|---|---|---|---|---|---|---|
SYSTEM_SERVICE_EXCEPTION | 0x0000003b | 00000000`c0000096 | fffff801 `025b100b | ffff908b`378ada60 | 00000000`00000000 | gdrv2.sys | gdrv2.sys + 100b | ntoskrnl .exe + 1c10a0 |
In such a case, first check if the power of the hard disk from which you are booting the Windows operating system is securely connected in the space between the twoPower supply and the whole disk.
Make sure your SATA data sent to the drive is also securely connected to the connector of the corresponding hard drive, and this will help the SATA connectors on the motherboard by checking that the main cable is not damaged.
The motherboard may temporarily cause another blue screen, but this is not so common. It can also be caused by faulty software such as your drivers or method of operation, as well as other hardware segments such as your processor, GPU, and RAM.
In order to enter BIOS via the Universal Series bus, the keyboard sometimes needs to be plugged into the thumb connector located on the back of your motherboard’s main I / O screen.
This will indicate which USB port the USB end of the PC keyboard should be plugged into so that keystrokes are recorded so you can enter the BIOS that your motherboard manual tells you about. You
When trying to enter BIOS, be sure to set the option to detect USB legacy music devices after enabling it.
So your keyboard could very well use any other USB port, including your motherboard, and your keystrokes will definitely be recorded.
If you find that Windows was first installed with Sata, or that Ahci mode is enabled by default, check The interface method set for your hard drive.
In the BIOS, the interface mode for the drive should only be set or re-selected using this option in the BIOS.
You should be especially careful when resetting BIOS to factory defaults, failing to pay through BIOS, resetting jumpers on the motherboard, or pressing a button on the motherboard, which indicates what you’ve done.
In such an absolute case, you need to properly configure the interface to get your BIOS hard drive working again.
Either you get a boot hook because the gw990 compatible disk or partition cannot be displayed, or the glass window might be called to boot otherwise
Operating system.
Make sure you don’t need to set any additional player options that your company finds in bios from Sata mode to raid app.
If the mode changes from Sata to Raid, the hard drive and this installed version of Windows will not be suitable for sneakers or will not be visible to the course at startup, resulting in booting from a trapcoy.
Since the system is built relatively young, I doubt that you are only to blame for the physical drive.
Unless it has been corrupted or formatted.
If the player in question does not have a hardware defect, you should proceed to the points mentioned above in the settings for use.
Also make sure that the hard drive to which the first device should be removed is installed in the BIOS boot menu functions, and find the operating system compatible with the bus in the motherboard BIOS.
기가바이트 메인보드 블루스크린
Gigabyte Mainboards Bluescreen
Placas Base Gigabyte Pantalla Azul
Gigabyte Tela Azul Da Placa Mae
Gigabajtowe Plyty Glowne Niebieski Ekran
Gigabyte Moederborden Blauw Scherm
Ecran Bleu Des Cartes Meres Gigaoctet
Schermo Blu Delle Schede Madri Gigabyte
Gigabyte Moderkort Bla Skarm
Materinskie Platy Gigabyte Sinij Ekran