Corrective Action How To Perform A Full System Backup In Windows 7

January 19, 2022 By Justin Fernando Off

Table of Contents

Recommended: Fortect

1. Download and install Fortect

2. Open the program and click "Scan"

3. Click "Repair" to start the repair process

Download this software and fix your PC in minutes.

You should read these troubleshooting tips if you know how to perform a full system backup when your computer has a Windows 7 error. Open the control panel.Click System and Security.Click the Backup and Restore option.In the left pane, click the Generate Object Image option.Select the On an empty hard drive option.Select an external hard drive to back up your device.Click the Next button.

Code: -01

Display: SDRAM ERROR

Description: PU PCB SRAM error

Reasons. Is the error repeated?

Remedy: Turn the printer back on. Replace specific PU board.

Code: -02

Display: XXXXXXXXXXXXXXXX CRC CHECK NG

Description: The CPU reports a CRC check error on boot.

Reasons. A CRC check error has been detected after loading PU files (PU firmware, media user data LEDs, and head alignment data).

Remedy: Turn on the photo printer again and download the data transfer again (during normal printer operation, the download simply does not occur and the error does not occur).

Code: -03

Display: CHARGER XX XX

Description: PU PCB Flash ROM Hash Validation Error

Reasons. Is the error repeated?

Remedy: Turn this printer back on. Replace the PU PCB.

Code: -04

Display: WDT ERROR

Description: Processor firmware is out of order.

Reasons. Is the error repeated?

Remedy: Turn the printer back on. Replace the PU PCB.

Code: -05

Display: COMMUNICATION ERROR

Description: An error in the PU-CU interface.

Reasons. Is the CU build set correctly? The printer is recovering from a CU board replacement error.

Remedy: Reinstall assembly properly. Replace CU board. Replace the PU PCB.

Code: 001

Display: Help Desk Call 001: Error

Description: An exception occurred during a machine check hardware error. (Defective card or possible lack of power supply capacity)

Reasons:

Remedy: Replace the CU PDL board.

Error calling service 001Checking machine
Exceptional hardware problem detected (PCB error or insufficient endurance)
(PDL only)
If CE1 is not detected, error SC001 occursReplace Printer Controller BoardEnable/Disable
002: Error
003: Error
005: ErrorUnexpected CPU exceptionThis error appears with Are you?YesPower off/on

What is Windows Backup. Windows Backup also gives you the option to create a system image, which is most likely a clone of a disk of the same size. The system token contains Windows 7 and your standard settings, programs, and files. You could use it to get a message from your computer if your disk breaks badly.

Replace printer control board

Enable/Disable
012: ErrorThe watchdog timed out because the system timer interrupt did not occur for some mysterious reasonIs this error message displayed again? YesPower off/on

Replace what I would say is the printer controller board

Call support
020: ErrorCU-FW in Nand FLASH was not fully recognized or a SUM check error occurredDoes this error occur again?Yes

< td>Disable/Enable

Recommended: Fortect

Are you tired of your computer running slowly? Is it riddled with viruses and malware? Fear not, my friend, for Fortect is here to save the day! This powerful tool is designed to diagnose and repair all manner of Windows issues, while also boosting performance, optimizing memory, and keeping your PC running like new. So don't wait any longer - download Fortect today!

1. Download and install Fortect

2. Open the program and click "Scan"

3. Click "Repair" to start the repair process

Replace printer control board

Call support
024: ErrorCU font ROM hash errorDoes this error message reappear?YesPower off/on< p >Replace the printer so it has a PCB connector

Call support
030: ErrorCU RAM check failedDoes this error message reappear?YesPower off/on

Select your appetizers and click “Cokeep”. Select Backup Options to open the backup area with your computer’s system settings. Under File History Backup, select Add Drive to select the external hard drive that you really want to use to back up your registry history.

Replacing the controller board inkjetth printing

Call support
040: ErrorCU EEPROM errorDoes this error message reappear?Yes Power off/on

Click Start.Go to Control Panel.Go to the “System and Security” section.Click Backup and Restore.On the backup or restore files screen, pause the backup setting.Select the location where customers want to save the backup and click Next.Select Let Windows decide (Recommended).Click Next.

Replace some printer control boards

Enable/Disable
042: Error
043: Error
045: ErrorFlash file system errorError accessing the flash ROM that is directly connected to the CU boardFormatting the artificial flash -memory. (You need to be careful as this F/W NIC will be removed.
The network card firmware must be written to support the utility after formatting.) If the error persists, replace the inkjet control boardCall support
051: ErrorCU fan error
Abnormal status of the CPU cooling adapter on the CU circuit boardIs the CPU fan connected correctly?

Select the Start control, then select Control Panel> System and Security> Backup and Restore.Select Configure Backup.Connect the external delivery device to your Windows 7 PC, then select Update.Select the external storage device under “Where to back up” and click “Next”.

Will replacing the fan solve the problem?

No
Yes

Connect correctly.
Replace fan.