Troubleshooting Steps For An Electric Dryer
March 31, 2022In this guide, we are going to uncover some of the possible causes that can cause problems with the electric dryer, and then we will offer some possible solutions that you can try to solve this problem.
Recommended: Fortect
Typically, an 800 status almost certainly indicates that a new large disk available for backup has not been found, the requested disk has the wrong density, or the single storage device has been disabled. This error is usually not related to system resources such as hard drives, memory, or resources managed by the EMM server.
Give us an idea about your main operating system, version and NBU etc.
However, there can be multiple reasons for the 800 (resource request failed) status in NetBackup(tm). This error indicates that NetBackup Execution Policy Manager was unable to allow you (nbpem) to obtain the required resources from all Enterprise Media Manager (EMM) processes. Typically, status 800 indicates that the backup disk cannot be selected, or that the requested disk is of the wrong thickness, or that the storage device is corrupted. This error usually does not point to system resources such as disk or memory, but to large resources managed by the EMM server.
Troubleshooting
:
Make sure thatthe disks defined in the required storage are in the “UP” state. Having drives “DOWN” can cause the backup to fail with status 800.
usr/openv/volmgr/bin/tpconfig Or (unix) %install_path%VeritasVolMgrbintpconfig -d (Windows)
or see http://seer.entsupport.symantec.com/docs/278533.htm
ID 800, Status: Task 6 netbackup.0 failed with status 800 Error ) (resource objection.
NetBackupStatus Code: 800
Tech note ID | Description |
---|---|
183702 | NET_BUFFER_SZ, SIZE_DATA_BUFFERS and NUMBER_DATA_BUFFERS – how they work and how to configure them |
276739 | STATUS CODE: 156 “A snapshot error occurred” when using VSP for VSS to back up open files. More |
290185 | NetBackup 6 veritas™ is generally welcome. Upgrade your five portals! |
254809 | DOCUMENTATION: How to configure Windows e-mail log clients to use BLAT and so nbmail.cmd in Veritas NetBackup™ |
274063 | Robot test codes that can be used for test functionsSCSI capabilities of each robot |
280202 | GENERAL Error: When attempting to expire the latest media in Veritas NetBackup™ 6.0 using the bpexpdate command, a voicemail message appears “The requested media ID was not found in the received EMM database.” |
278533 | STATUSCODE: 800, NetBackup 6.0 jobs should fail with status 800 (resource request failed). |
244652 | DOCUMENTATION: How to configure buffers in a Windows NT/2000 environment for network backup to improve performance |
264924 | DOCUMENTATION: How to restore an Exchange 2000/2003 database on the same or different client |
245184 | DOCUMENTATION: How NetBackup Sets Up Mailbox Backup for an Exchange 2000/2003 Server |
Note. All links to the documents listed in the table below (by ID TechNote) can be found in the “Documents” section.
183702: SIZE_DATA_BUFFERS net_buffer_sz, NUMBER_DATA_BUFFERS and how they work and how to configure them
http://support.veritas.com/docs/183702
244652: DOCUMENTATION: Configuring NetBackup buffers for a pre-Windows NT/2000 environment
http://support-improve can.veritas.com/docs/244652
245184: Customizing Documentation: NetBackup for Exchange Server Mailbox Backup
http://support2000/2003.veritas.DOCUMENTATION: com/docs/245184
254809: How to configure email notifications for BLAT client windows in addition to nbmail.cmd in Veritas NetBackup™
http://support.veritas.com/docs/254809
264924: How To DOCUMENT: Restore an Exchange 2000/2003 site on the same or different client
http://customersupport.veritas.com/docs/264924
274063: Robtest commands can be used to test the SCSI functionality of almost any robot
http://support.veritas.STATUSCODE:com/docs/274063
276739: 156 “Snapshot Found” error when using VSP or VSS to back up open files.
http://support.veritas.code com/docs/276739
278533: STATUS: Nine hundred, NetBackup 6.0 jobs fail with status 800 (resource request failed).
http://support.veritas.com/docs/278533
280202: ERROR “The requested media ID was not found in relation to the EMM database” when trying to start bulk media in Veritas NetBackup™ 6.0 using the bpexpdate command.
http://support.veritas.DE com/docs/280202
SMART WORK Forums
For IT PROFESSIONALS
Thank you. We have received your request and will correct the situation immediately.
Login
Come visit us!
Recommended: Fortect
Are you tired of your computer running slowly? Is it riddled with viruses and malware? Fear not, my friend, for Fortect is here to save the day! This powerful tool is designed to diagnose and repair all manner of Windows issues, while also boosting performance, optimizing memory, and keeping your PC running like new. So don't wait any longer - download Fortect today!
Are you or
an IT professional?
Join the Tek Tips forums!
to your messages
favorite forums
your messages
*The Tek-Tips feature depends on which emails the participants receive. By subscribing, agree to receive emails.publications
Forbidden
Rules advertising, sale of watches, courses and theses.
Students, click here