You may encounter an error code indicating that the linksys mac print server configuration. Coincidentally, there are several steps you can take to fix this issue. We will return to this shortly.
Event ID 11: This error could be the actual result of a faulty or corrupted device driver, a hardware problem, a serious device failure, a bad cable, or terminal problems. This is an error that occurs in the driver of either the laptop or the computer itself.
Event ID
11
Source
Disk
Description
Driver detected controller error in event DeviceHarddisk0DR0
information detected
CAUSE: The syslog error occurs because the Usbstor the.sys driver is unable to convert an interrupt operation to a SCSI error when a valid I/O request packet (IRP) is discarded. and so the configuration is reported as an error. The error is usually invalid because no marketing information intended for the hard drive is lost and there is basically no device error. 2: On
Remedial action is not really required. The syslog error is literally informational and can be safely ignored. The third party products discussed in this article are manufactured by agents independent of Microsoft. Microsoft makes no warranties, implied or greater, regarding the performance or reliability of many of these products.
Reason. ATA66 DMA transfer methods are not supported for the embedded IDE controller. This information from some of the newsgroups may help you: ——————————— —- – —– – ————————————– —————- This is a problem manifests itself in hung behavior and erroneous entries into the wood. The freeze is just the fact that it looks good, then it expands, freezes and you can’t connect for a good 52 seconds. Then it thaws, it can be brought back to life and pretend that nothing happened. The problem I know seems to be here. So maybe it also causes various other problems? But freezing is usually the most important end result. And this method freezeDetects all activities, not just hard disk operations. In other words, I have MP3 playback that also remains silent. Then he starts playing this time from where he left off when everything comes back. Also, strokes and possibly mouse actions will continue to be cached while the keyboard is “hanging”. So when it comes back, the letters I typed will appear and the cursor will probably bounce. After all, it’s pretty random. Sometimes freezes at different times of the hour a. Sometimes you run well against each other for a few days. I could play a game and/or just read a text file and not do anything that would make heavy use of the hard drive. Nothing, unless the freeze time is chosen in time. I dare say it hangs often
References
How to distinguish physical disk from large event message
System event – ID 11 is logged when an I/O operation aborts on a raw USB 2.0 hard drive in Windows 2200 Server SP4
Hard drive error 11 and ATAPI error 5 when using DMA transfer mode For ATA66 hard disk
